Search

Link copied

$745

Kennedy Roper

STYLE NO.CL6508.C2-6301-D-10.5

STYLE NO.CL6508.C2-6301-D-10.5

The Kennedy Roper is made up of hand burnished Florence Buffalo leather. With a low heel and round toe, the Kennedy Roper is saddle and performance ready. This vintage-inspired roper...
Read more below

Size:

Selected:

Size: Width: Toe + Heel:

Choose size

Size

Order a half size up for a wider fit

Lucchese boots generally run true to size, but don’t be surprised if your western boot’s size is slightly smaller than your dress shoe size due to its construction. Consult our Fit Guide for an expansive understanding of your true fit.

Size Chart

Men’s Size Conversions Chart

size-chart
Size:
Fit guide
Size chart
Order a half size up for a wider fit

Width

Men's boots are sized in D and EE widths.
D = average to medium EE = wide

Women's boots are sized in A, B, and C widths.
A = narrow B = average to medium and C = wide

A general rule of thumb is the further you get from the letter A, the wider the boot is.

Width:

Toe & Heel

Lucchese offers a variety of toe shapes and heel styles so every customer can find a boot well-suited for his or her particular lifestyle and personality. See our full list below.

 
TOES
Q TOE Modeled as a hybrid toe, it is highlighted by its squared-off edge and low profile. (1 ¼” wide)
W TOE Our modern square toe is found on walking & riding boots and is known for its comfort. (1 ½” wide)
7 WESTERN SQUARE TOE A modern take on the classic western style, this square toe is one of our most popular. (⅞” wide)
6 MEDIUM ROUND TOE A traditional rounded western toe, it is timeless and elegant.
5 - SNIP TOE Originally made for getting in and out of a stirrup, the snip toe is pointed for a traditional look. (5/8:” wide)
S TOE Found on dress and casual styles; this rounded toe abuts a squared off outsole for a distinguished look.
S5 - 5 TOE WITH A SPRING Our 5 toe with a pronounced upward curvature of the toe box. (⅝” wide)
R - ROPER TOE The roper toe is rounded and has a u-shape that is most like a normal shoe toe shape.
C TOE Similar to the roper toe, the C toe has a slightly less rounded u-shape; often found on work boots.
X1 - FRENCH TOE Found on dress boots; this rounded toe abuts a squared off outsole for a distinguished look. (1” wide)
Z TOE The narrow rounded toe is close to a common dress shoe as it narrows.
2 TOE A more narrow rounded toe that almost comes to a point is found on traditional western styles.
K TOE This is a rounded toe with a defined squared off outsole for contrast.

 
HEELS
0 heel (⅞” tall)
3 Walking heel (1 ½” tall)
4 Cowboy heel (1 ¾” tall)
9 Roper with pitch (1” tall)
8 Fowler heel with a pitch (1 ⅛” tall)

Toe + Heel:
Made to order

Selected toe + heel:

This item is currently in stock at our retail store. To have it delivered to your home, call the store to place your order.

Fit Guide

  • TOE + HEEL
    TOE + HEEL

    01. TOE BOX

    The toe box on a boot surrounds the toes and the front part of the foot.

    02. HEEL

    A boot will initially slip slightly in the heel (around ¼ to ½ inch)

    WHAT'S YOUR STYLE

    Lucchese offers a variety of toe shapes and heel styles so every customer can find a boot well-suited for his or her particular lifestyle and personality. See our full galleries below.

    TOE GALLERY

    Q TOE

    Modeled as a hybrid toe, it is highlighted by its squared-off edge and low profile. (1 1/4” wide)

    W TOE

    Our modern square toe is found on walking & riding boots and is known for its comfort. (1 1/2” wide)

    7 WESTERN SQUARE TOE

    A modern take on the classic western style, this square toe is one of our most popular. (7/8” wide)

    6 MEDIUM ROUND TOE

    A traditional rounded western toe, it is timeless and elegant.

    5 SNIP TOE

    Originally made for getting in and out of a stirrup, the snip toe is pointed for a traditional look. (5/8” wide)

    S TOE

    Found on dress and casual styles; this rounded toe abuts a squared off outsole for a distinguished look.

    S5 - 5 TOE WITH A SPRING

    Our 5 toe with a pronounced upward curvature of the toe box. (5/8” wide)

    R ROPER TOE

    The roper toe is rounded and has a u-shape that is most like a normal shoe toe shape.

    C TOE

    Similar to the roper toe, the C toe has a slightly less rounded u-shape; often found on work boots.

    X1 - FRENCH TOE

    Found on dress boots; this rounded toe abuts a squared off outsole for a distinguished look. (1” wide)

    2 TOE

    A more narrow rounded toe that almost comes to a point is found on traditional western styles.

    K TOE

    This is a rounded toe with a defined squared off outsole for contrast.

    HEEL GALLERY

    0 HEEL (7/8'' TALL)  

    2F FASHION HEEL (2'' TALL)

     

    3 WALKING HEEL (1 1/2'' TALL)

    4 COWBOY HEEL (1 3/4'' TALL)

    9 ROPER WITH PITCH (1'' TALL)

    8 FOWLER HEEL WITH A PITCH (1 1/8'' TALL)

  • Width
    WIDTH
    • Men's boots are sized in B, D and EE widths.

    • B = narrow

      D = average to medium

      EE = wide

    • A general rule of thumb is the further you get from the letter A, the wider the boot is.

  • SIZE
    SIZE

    Lucchese boots generally run true to size, but don’t be surprised if your western boot’s size is slightly smaller than your dress shoe size due to its construction. The best way to find your fit is to confirm your foot size with a boot expert. You can also consult the charts below.

    Men's Size Conversions Chart

    size-chart

    TIP

    Lucchese boots typically fit about one half-size smaller than everyday dress shoes. If the boot has a padded foot bed, then the boot will fit to size. It’s a good idea to confirm your size with a shoe or boot expert every few years, as the size and shape of your feet can change over time.

    01 The ball of your foot shoud sit in the widest part of the boot.

    02  A properly fitting boot should feel like a firm handshake across the instep.

    03 There will be a slight slip in the heel.

    04 toes rest comforably in the ball.

    05 Tightest around the middle of the crown.

  • How To Try On A Cowboy Boot
    How To Try On A Cowboy Boot

    FOOT GOING IN

    FOOT IN

    01 Put both fingers through the pull straps and insert your foot into the boot.

    02 Keeping the heel on the ground, use your body weight to get your foot into the boot. *Note: You will feel resistance as you try to pull the boot on.

    03 As your foot sinks into the boot, listen for the audible “thump”.

    04 Walk around and feel the fit of the boot.

    05 What you’ll feel: Toes should be comfortable, and the snuggest section will be across the top of the foot. * Note: Notice the slight slip in the heel.

    COMMON FIT PROBLEMS

    If the boot feels too tight, go for a wider width. If the boot feels too loose, try a smaller size.

  • Wearing in Your Boots
    Wearing in Your Boots

    Once the boot fits, use these tips to help wear them in.

    CONDITION

    Coat your new boots with natural leather conditioner.

    WEAR

    For the first 6-8 outings, try for at least 2-3 hours of wear. Continued wear allows your body heat and moisture to permeate the boots, softening the leather. Over time, Lucchese’s leather heel, insole and outsole conform to the shape of your foot, providing a more flexible and comfortable fit.

    WAIT

    Be patient - the more you wear your new boots, the better.

    NOTE ABOUT EXOTICS:

    Soft leathers, such as goat or cowhide, have more elasticity than exotic leathers. Most exotics, such as alligator or ostrich, should be fitted with little to no additional stretching required.

This item is currently in stock at our retail store. To have it delivered to your home, call the store to place your order.

Notify Me When Available

FREE SHIPPING ON ORDERS OVER $100

30-DAY RETURN OR EXCHANGE

The Kennedy Roper is made up of hand burnished Florence Buffalo leather. With a low heel and round toe, the Kennedy Roper is saddle and performance ready. This vintage-inspired roper is a nod to the cowboys who roamed the West. Handmade in Texas.

  • Florence buffalo vamps
  • Florence buffalo quarters
  • 10-inch quarters
  • Cruces cord pattern on collar
  • Kennedy pull straps
  • Black stacked-leather heel
  • Single-stitched welt
  • Leather outsole
  • Handmade in Texas

Buffalo

The softest of Lucchese’s smooth leathers, buffalo is luxurious in both fit and finish. As velvety as glove leather, it’s also surprisingly durable and appropriate for all occasions. When new, buffalo boots should hug the feet tightly. In time and with repeated wear, they will mold to your feet for a one-of-a-kind fit and show a rich vintage patina.

The Roper

The Lucchese roper is a Western boot with British inspiration and Texas roots. The roper can be traced back to England’s military and Arthur Wellesley, who was the first Duke of Wellington and former prime minister. That’s why it’s sometimes called a Wellington. With a 1-inch heel, clean lines, and a rounded toe, ropers walk the line between boot and shoe. Supremely comfortable, Lucchese ropers transcend time — and styles. Cowboys love them. So do captains of industry.

Instructions

Clean: Remove loose dust or dirt with damp cloth or soft brush. For heavily soiled products use Lucchese Leather Cleaner (see care instructions) Condition: Apply Lucchese Leather Conditioner to your boots liberally, let dry. Polish: Apply neutral or color matching cream-based polish and buff with a soft cloth to a shine. Protect: Apply Lucchese Premium Leather Protector.

Recently viewed items

Check availability in store

Find the nearest store:

There are no stores within 100 miles from your location

Availability for selected size: